ZNY泡沫玻璃耐磨剂是以无机物材料为主，加上适量有机物材料，经过高温反应后制得的泡沫玻璃专用耐磨剂。泡沫玻璃安装后，需承受机械设备运行过程中产生震动磨撞，而耐磨剂主要起到减轻或防止泡沫玻璃因机械震动磨撞而产生的损伤，脱落及破碎影响。

      ZNY cellular glass anti-wear agent is a specific agent obtained adding a certain amount of organic material into the main none-organic material before reacting under high temperature. The major function of it is to prevent the damages, peel and cracking to the cellular glass caused by shock or friction during the operation of the mechanical equipment。

 使用方法
1.将耐磨剂用刮刀均匀涂抹在泡沫玻璃内壁，待稍干后即可进行安装。 2.每平方米用量约2 Kg。

1. Use a scraper to homogenously apply the anti-wear agent onto the inner layer of the cellular glass. After a little cried, bond it tightly onto the equipment or pipe.
2. Consumption per square meter is approx 2 Kg.

注意事项/Note
1.每桶开启后，需遮盖桶口防止产品快速固化。

2.每桶开启后，如果长时间不用的，最好密封封存。
3.贮存：应贮存在室内仓库或阴凉、干燥的通风场所内。  

1. After each bucket of it is used, the bucket must be properly sealed to prevent the curing of the product.
2. After each bucket of it is used, if in a certain time the agent will not be used. It is suggested to seal it property.
3. Storage: it must be stored inside warehouses or in a cool and dry place with good ventilation.

技术参数/Technical Data